Altera DSP Development Kit, Stratix V Edition Instrukcja Użytkownika Pobierz pdf (Strona 55)

Appendix A: Programming the Flash Memory Device A–5

Restoring the MAX V CPLD to the Factory Settings

July 2013 Altera Corporation DSP Development Kit, Stratix V Edition

User Guide

13. The restore script cannot restore the board’s MAC address automatically. In the

Nios II command shell, type the following Nios II EDS command:

nios2-terminal r

and follow the instructions in the terminal window to generate a unique MAC

address.

f To ensure that you have the most up-to-date factory restore files and information

about this product, refer to the DSP Development Kit, Stratix V Edition page of the

Altera website.

Restoring the MAX V CPLD to the Factory Settings

This section describes how to restore the original factory contents to the MAX V

CPLD on the development board. Make sure you have the Nios II EDS installed, and

perform the following instructions:

1. Set the board switches to the factory default settings described in “Factory Default

Switch Settings” on page 4–2.

1 DIP switch SW3.1 set to on includes the MAX V device in the JTAG chain.

2. Launch the Quartus II Programmer.

3. Click Auto Detect.

4. Click Add File and select <install

dir>\kits\stratixVGS_5sgsmd5kf40_dsp\factory_recovery\max5.pof.

5. Turn on the Program/Configure option for the added file.

6. Click Start to download the selected configuration file to the MAX V CPLD.

Configuration is complete when the progress bar reaches 100%.

f To ensure that you have the most up-to-date factory restore files and information

about this product, refer to the DSP Development Kit, Stratix V Edition page of the

Altera website.

1 2 ... 50 51 52 53 54 55 56 57 58

Brak uwag

Altera DSP Development Kit, Stratix V Edition Instrukcja Użytkownika Strona 55