
Parameter Value Description
Pattern
• Color bars
• Uniform
background
Select the pattern you want to use for the
background test pattern layer.
Uniform values 0-255; Default = 0 (R/
Y); 128 (G/Cb/B/Cr)
When pattern is uniform background, you
can specify the individual R'G'B' or Y' Cb' Cr'
values depending on the currently selected
color space.
Video Mixing Signals
Table 6-3: Alpha Blending Mixer Signals
The table below lists the signals for Alpha Blending Mixer IP core.
Signal Direction Description
reset Input The IP core asynchronously resets when you assert this
signal. You must deassert this signal synchronously to the
rising edge of the clock signal.
clock Input The main system clock. The IP core operates on the rising
edge of this signal.
control_av_address Input control slave port Avalon-MM address bus. This bus
specifies a word offset into the slave address space.
control_av_chipselect Input control slave port Avalon-MM chipselect signal. The
control port ignores all other signals unless you assert
this signal.
control_av_readdata Output control slave port Avalon-MM readdata bus. The IP
core uses these output lines for read transfers.
control_av_write Input control slave port Avalon-MM write signal. When you
assert this signal, the control port accepts new data from
the writedata bus.
control_av_writedata Input control slave port Avalon-MM writedata bus. The IP
core uses these input lines for write transfers.
din_N_data Input din_N port Avalon-ST data bus. This bus enables the
transfer of pixel data into the IP core.
din_N_endofpacket Input din_N port Avalon-ST endofpacket signal. This signal
marks the end of an Avalon-ST packet.
din_N_ready Output din_N port Avalon-ST ready signal. The IP core asserts
this signal when it is able to receive data.
din_N_startofpacket Input din_N port Avalon-ST startofpacket signal. This signal
marks the start of an Avalon-ST packet.
UG-VIPSUITE
2015.05.04
Video Mixing Signals
6-5
Video Mixing IP Cores
Altera Corporation
Send Feedback
Komentarze do niniejszej Instrukcji